Rlc Configuration - Nortel RLC Installation And Administration Manual

June 2005

RLC configuration

This section shows the configuration settings for the RLC. You can obtain a
similar configuration printout by performing a configuration download while
connected to the RLC.
Note: Configuration settings are separated by commas (,).
Configuration example
This configuration example uses the settings identified in the network diagram
shown on page 353.
SYSCFG 254,HOST1
APPMODCFG 0,NC,NC
APPMODCFG 1,E,G729A,G729A
APPMODCFG 2,NC,NC
APPMODCFG 3,NC,NC
SYSCFG 254,HOST1
RLCCFG E,E
ACCFG D
PORTCFG 0,1,0,2,2,D
PORTCFG 1,1,0,2,2,D
PORTCFG 2,1,0,2,2,D
PORTCFG 3,1,0,2,2,D
PORTCFG 4,1,0,2,2,D
PORTCFG 5,1,0,2,2,D
RLC Installation and Administration Guide
Sample configuration files
RLC's IP address information:
Unit ID
Site Name
DSP application module
(only module 1 is configured in this
case)
Unit ID and node name
Ports configured as remote ports
367