Table of Contents
Advertisement
June 2005
Performing PSTN connectivity testing
To test your remote unit's PSTN connections:
From the Menu Bar, choose Tests → PSTN Connectivity.
1
Result: The PSTN Connectivity Test dialog box displays, similar to the
following:
2
Select the Remote ID of the unit that you want to check the PSTN
connection on from the Remote ID drop down list box.
3
Do one of the following:
Click on the Disruptive option button for tests performed at initial
installations or after-hours when you can shut down the entire system.
Click on the Non-Disruptive option button for tests performed during
business hours or any time when you cannot shut down the entire
system.
4
Enter the port number of the first port that you want to test PSTN
connectivity on in the Start Port field.
5
Enter the port number of the last port that you want to test PSTN
connectivity on in the End Port field.
6
Click on the OK button.
When the test is complete, the unit presents a log with test results and statistics.
RLC Installation and Administration Guide
Troubleshooting
321
Advertisement
Table of Contents
Troubleshooting
