Table of Contents
Advertisement
Using Configuration Manager
Creating a configuration file on the PC
To create a configuration file on the PC:
1
Start Configuration Manager.
2
Make the required changes on each property sheet.
Note: You do not have to be logged on to a unit to make configuration
changes. When you are not logged on to a unit, you can perform an offline
configuration.
3
From the Menu Bar, choose File
Result: The Save As dialog box displays.
4
Enter a descriptive name for the file.
The file name normally identifies the type of configuration it contains.
Example 1: If the file contains a basic configuration that is to be used for a
specific type of unit, enter template as the file name.
Example 2: If the file contains a configuration that is unique to a specific
unit, enter the unit's name or number as the file name.
5
Ensure that the Save as type drop down box shows text file (*.txt)
6
Specify the folder where you want to save the file.
7
Click on the OK button.
Result: The file is saved.
Note: Nortel strongly recommends that you do not manually edit this file.
Opening a configuration file
To open a configuration file:
1
Start Configuration Manager.
2
If you want to work in online mode, log on to the unit. Otherwise, ensure
that you have selected the device type.
3
From the Menu Bar, choose File
Result: The Open dialog box displays.
4
Ensure the Files of type drop down box shows text files (*.txt).
5
Navigate to the folder containing the file you need.
146
→
Save As.
→
Open.
RLC Installation and Administration Guide
Standard 4.0
Advertisement
Table of Contents
Troubleshooting
