Table of Contents
Advertisement
June 2005
Command buttons
The following buttons display on every property sheet listed in the first level of
the Remote Gateway 9100 Series Configuration Manager system tree (left
pane):
OK
Click on this button to accept any changes you have made to the displayed
property sheet. This command stores these values in a temporary file on
your PC until you are ready to update the unit's Flash memory. For more
details, refer to "OK" on page 140.
Default
Click on this button to insert default values into every field in the displayed
property sheet.
Send
Click on this button to update the buffer of the unit you are logged on to
with the values currently on the displayed property sheet. For more details,
refer to "Send" on page 141.
Retrieve
Click on this button to display the saved configuration value for every field
on the displayed property sheet from the unit's local buffer. The unit's local
buffer contains the last sent data. For more details, refer to "Retrieve" on
page 142.
Help
Click on this button to display online Help for the property sheet you are
working with. For other methods of displaying Help, refer to "Using online
Help" on page 136.
RLC Installation and Administration Guide
Using Configuration Manager
135
Advertisement
Table of Contents
Troubleshooting
