Nortel RLC Installation And Administration Manual page 291

June 2005
Information concerning the DSP application modules that are installed on the
RLC also appears in the Startup Information dialog box. This information
includes the following:
The column
SLOTNO
STATUS
TYPE
VERSION
This dialog box displays as the result of a successful attempt to log on to a
particular RLC. You can locate the information contained in the preceding table
by using the scroll bar available in the System Information section of the dialog
box. Refer to page 152 for further details.
RLC Installation and Administration Guide
contains the following information:
the slot number occupied by the application module.
Valid options are 1, 2, 3, and 4.
whether the slot contains a functioning DSP application
module. Valid options are:
EQUIPPED—a working DSP application module is in the
slot
OUT SERVICE—a faulty application module is in the slot
UNEQUIPPED—no application module is in the slot
the type of application module in the slot
the version of application module in the slot
Administration
265