Table of Contents
Advertisement
June 2005
Symptom
CONFIG UPLOAD FAILED
attempting to perform a
configuration upload by TFTP.
(continued)
System not responding
appears when working with
Configuration Manager.
Nothing happens when
attempting to log off from the
RLC.
Display Logs definitions
You can locate Display Logs definitions in the Remote Gateway 9150
Installation and Administration Guide (NTP 555-8421-215) and Configuration
Manager online Help.
RLC Installation and Administration Guide
What to do
when
2
Ensure that the configuration file you are
attempting to upload is compatible with
current RLC firmware.
3
Perform the configuration upload using a
previous configuration file, if necessary.
Note: Each time you perform a RLC
firmware upgrade, create a backup of the
configuration. The configuration database
format in the RLC is dependent on the
version of firmware installed on the RLC. If
you recently downgraded to a previous
version of RLC firmware, you may also need
to revert to a previous configuration format.
It is possible that communication has been
lost between the administration PC and the
remote unit.
Close Configuration Manager, and then
restart it.
It is possible that communication has been
lost between the administration PC and the
node you were logged on to.
Close Configuration Manager, and then
restart it.
Troubleshooting
311
Advertisement
Table of Contents
Troubleshooting
