Table of Contents
Advertisement
Installing the RLC
6
Do one of the following:
IF you want
to perform an
offline configuration,
online configuration,
Establishing a serial connection
To establish a serial connection:
1
From the Menu Bar, choose Connect
Result: The Serial Port Configuration dialog box displays, similar to the
following:
2
Enter the COM port number the unit is connected to in the Port Number
field, and then click on the OK button.
Result: The User Authentication for Serial Mode dialog box displays.
3
Enter guest in the Login Name field.
4
Enter the default password, guest123, in the Password field.
Note: Nortel recommends that you do not change the password until your
system is up and running.
5
Click on the OK button.
Result: Configuration Manager initiates a connection attempt and displays
the following message:
Trying Connection
94
THEN
→
Choose View
Continue with "Performing configuration
with the Configuration Wizard" on page
96.
continue with "Establishing a serial
connection" on this page.
→
Logon Unit
RLC Installation and Administration Guide
Standard 4.0
→
Device Type
RLC.
→
Serial.
Advertisement
Table of Contents
Troubleshooting
