Table of Contents
Advertisement
June 2005
Starting and viewing Configuration Manager
The Configuration Manager software application is best viewed when your
monitor settings are configured as 1024 by 768 pixels using Small Fonts at 96
dpi. If you use larger fonts, some fields and buttons might be hidden. You must
use the horizontal and vertical scroll bars to view the hidden fields or buttons.
For instructions on changing your display settings, refer to the Windows online
help on your PC.
To start and log on to a Configuration Manager session:
1
From the Menu Bar, choose Start
9100 Series
Result: Configuration Manager opens and prompts you for the logon name
and password.
2
Enter admin in the Login Name field.
3
Enter root in the Password field.
Note: This is the default password. You can change the password after
installation, though Nortel recommends that you do not change the
password until your Remote Gateway 9100 Series system is up and
running.
4
Click on the OK button.
Result: The system informs you of a successful logon. In the event of an
unsuccessful logon, the system informs you of the need to re-enter the
information.
RLC Installation and Administration Guide
→
Configuration Manager.
Using Configuration Manager
→
→
Programs
Remote Gateway
127
Advertisement
Table of Contents
Troubleshooting
