Table of Contents
Advertisement
Configuring the RLC
How the remote site goes online
When going offline, the remote unit's offline timer activates. When the timer
expires, the remote unit automatically initiates a "going online" request to the
host PBX. If the RLC receives the request successfully, the remote site and its
associated digital telephones go online.
If you configure no online entries in the online/offline table, the RLC instructs
the remote unit to go offline forever each time it processes an offline entry. To
go back online, a remote user must enter the online SPRE code in order to place
host-controlled calls on either the PSTN or IP network.
218
RLC Installation and Administration Guide
Standard 4.0
Advertisement
Table of Contents
Troubleshooting
