Nortel RLC Installation And Administration Manual page 216

Configuring the RLC
Remote Port Configuration field descriptions
Field
Usage
Compression Rate
190
Description
Select Dedicated to configure this port for use by one
DN only.
Select MultiUser to configure this port for use in a
time-share fashion by a variety of remote units or
different ports on the same remote unit.
Select Dynamic Pool to configure this port for use as
part of a dynamic pool. Ports in this pool can be
dynamically assigned to any remote port that requests
access to a port in the RLC port pool.
Select G.711 to enable transmission at 64 Kbps on this
port.
Select G.726 to enable transmission at 32 Kbps on this
port.
Select G.729A to enable transmission at 8 Kbps on this
port.
Select G.729A/FAX to enable transmission at 9.6 Kbps
stepped down to 7.2. 4.8, or 2.4 Kbps on this port.
Note: Ports for facsimile (fax) machines must be
configured with G.729A/FAX compression for proper
operation.
RLC Installation and Administration Guide
Standard 4.0