Nortel RLC Installation And Administration Manual page 235

June 2005
Field
Callback for PSTN
User On Demand Idle
Timer
User On Demand Min Call
Timer
CallParrot Feature
Online/Offline
Quality of Service
RLC Installation and Administration Guide
Description
The Callback for PSTN setting determines the site that
initiates additional trunk connections when the RLC
identifies the need for additional bandwidth.
Click on the Enable option button if you want the PBX
to initiate the additional trunk connections.
Click on the Disable option button if you want the RLC
to initiate the additional connections.
The default is Disable.
Enter the maximum number of seconds that a PSTN
connection can remain idle at this remote site before the
RLC closes it. For more details, refer to "Minimum call
duration timers and Idle timers" on page 203.
The default is 30.
Enter the minimum number of seconds that a PSTN
connection must remain open at this remote site before the
RLC closes it. For more details, refer to "Minimum call
duration timers and Idle timers" on page 203.
The default is 30.
Refer to page 168 for information on the CallParrot
Business Call Recording feature.
Click on the Online/Offline button to edit the online/
offline table for the remote site. Refer to "Online/Offline
table configuration" on page 219 for details on configuring
this table.
Click on the Quality of Service button to edit the Quality
of Service (QoS) Transitioning Technology settings for the
remote site. Refer to "Configuring QoS" on page 211 for
information on configuring these settings.
Configuring the RLC
209