Configuring An Rlc Port - Nortel RLC Installation And Administration Manual

Configuring the RLC

Configuring an RLC port

To configure an RLC port:
1 Click on the appropriate tab for the port you are configuring, as in Ports 0-
15 or Ports 16-31 for a 16-port RLC, Ports 0-15, Ports 16-31, Ports 32-47,
or Ports 48-63 for a 32-port RLC.
2 In the line for the port you are configuring, choose the type of port you want
to configure as follows:
IF you want to
configure a
remote port,
188
THEN
complete the following steps:
a Click on the Remote option button on the line of
the port number you are configuring.
b Click on the Configure button on the same line.
Result: The Remote Port Configuration dialog
box displays, similar to the following:
c Select the desired settings according to the
"Remote Port Configuration field descriptions"
on page 190.
d Click on the OK button to save the information
to a temporary file on your administration PC.
RLC Installation and Administration Guide
Standard 4.0