Nortel RLC Installation And Administration Manual page 131

June 2005
If you are using the RLC Multi-I/O cable–Enhanced, check the following points,
in addition to the items listed above:
Confirm that the 25-pair connector of Plug 5 and the 25-pair connector of a
cable leading to your cross-connect are properly and securely joined.
Confirm that the 25-pair connector at the other end of the cable mentioned
in the previous step is properly and securely joined to the 25-pair socket of
the cross-connect.
Confirm that the cable leading from the RLC to the cross-connect is in good
condition, end-to-end.
Ethernet connection
Check the following points in your Ethernet connection:
Confirm that the DB15–RJ45 adapter at Plug 2 of the RLC Multi-I/O
cable–Enhanced is properly and securely joined to Plug 2.
Confirm that the RJ45 plug of a CAT5 data cable leading to your Ethernet
hub is properly and securely seated in the RJ45 socket of the DB15–RJ45
adapter mentioned in the previous step.
Confirm that the other end of the CAT5 data cable mentioned in the
previous step is properly and securely seated in the appropriate Ethernet
hub socket.
Confirm that the CAT5 data cable leading to your Ethernet network's data
router is properly and securely seated in the appropriate Ethernet hub
socket.
Confirm that the CAT5 data cable leading from your Ethernet hub is
properly and securely seated in the appropriate socket of the data router
mentioned in the previous step.
RLC Installation and Administration Guide
Installing the RLC
105