June 2005
Example
Getting there RLC
The long instruction for this example is as follows:
1
Do the following:
IF
you are performing an offline
configuration,
you are performing an online
configuration,
2
In the left pane, click on the plus sign (+) beside Configuration Manager to
expand the node list.
3
Click on IP Configuration.
Result: The IP Configuration property sheet for the RLC displays in the
right pane.
PBX terminology
Throughout this guide, the term "host PBX" refers to any of the following
Nortel PBX platforms:
Meridian 1 PBX
CS 1000
CS 2100
RLC Installation and Administration Guide
→
Configuration Manager
THEN
select the device type as described in
"Selecting the device type for offline
configuration" on page 125.
connect to, and then log on to the node
as described in "Logging on to a unit" on
page 126.
About this document
→
IP Configuration
xxi