Ip Configuration Field Descriptions - Nortel RLC Installation And Administration Manual

Configuring the RLC

IP Configuration field descriptions

Field
IP Address
IP Network Mask
IP Gateway
Management IP
Information
Management IP
Address
Management IP Mask
182
Description
Enter the IP address of the RLC.
Enter the IP network mask of the RLC.
Enter the IP gateway of the RLC.
Click in the Enable check box if you want to assign an IP
address on the host PBX's internal LAN to the RLC.
Result: The check box clears and Configuration Manager
enables the Management IP Address and Management IP
Mask fields.
Click in the Disable check box if you do not want to assign
an IP address on the host PBX's internal LAN to the RLC.
Since this is the default setting, you only need to do this after
you have enabled management IP information.
Note: The second Ethernet port of the RLC is only available
with the RLC Multi-I/O cable–Enhanced.
Enter the IP address of the RLC on the host PBX's internal
LAN.
Enter the IP network mask of the host PBX if you want remote
units connected to this RLC to have the ability to configure
PBX settings.
RLC Installation and Administration Guide
Standard 4.0