Table of Contents
Advertisement
June 2005
2
Complete the fields in the Change Password dialog box.
3
Click on the OK button.
Result: The Password changed successfully dialog box displays.
4
Click on the OK button.
Changing the RLC password
To change the RLC (node) password:
ATTENTION!
1
From the Menu Bar, choose Connect
Result: The Change Password dialog box displays, similar to the following:
2
Complete the fields in the Change Password dialog box.
3
Click on the OK button.
Result: The Board Password Changed Successfully dialog box displays.
Note: This means that Configuration Manager has written the password to
the RLC's Flash memory.
4
Click on the OK button.
5
From the Menu Bar, choose Upload/Download
Result: Configuration Manager updates RLC's memory with the new
password.
6
Restart the RLC.
RLC Installation and Administration Guide
Do not change the RLC's password until the system is up
and working.
→
Change Password
→
Save to Flash.
Administration
→
Node.
239
Advertisement
Table of Contents
Troubleshooting
