Data Port Configuration For 911X On The Meridian 1 Pbx - Nortel RLC Installation And Administration Manual

Sample configuration files
Data port configuration for 911x on the
Meridian 1 PBX
This section shows the configuration settings for the data port on the Meridian 1
PBX. The data port provides the communication path between the RLC and the
Remote Gateway 911x series unit, and must be configured as an ATA.
Configuration example
This configuration sample is from a Meridian 1 PBX 11.
REQ: prt
TYPE: 2616
MARP NOT ACTIVATED
TN 9 16
DATE
PAGE
DES
DES NO DES
TN 009 0 00 16
TYPE 2616
CDEN 8D
CUST 0
AOM 0
FDN
TGAR 1
LDN NO
NCOS 0
SGRP 0
RNPG 0
SCI 0
SSU
XLST
SFLT NO
CAC_CIS 3
CAC_MFC 0
358
Telephone type
RLC slot and port numbers
TGAR must be configured to allow
trunk access. Refer to your PBX
documentation for more details.
RLC Installation and Administration Guide
Standard 4.0