Table of Contents
Advertisement
June 2005
4
Click on the Browse button.
Result: The Open dialog box displays, similar to the following:
5
Ensure the Files of type drop down box shows Upgrade Files(*.UPG).
6
Navigate to the folder where the firmware file is located.
7
Select the file, and then click on the Open button.
Example: Select rlc-100.upg, and then click on the Open button.
Result: The Software Upload dialog box re-displays. The file you selected
is shown in the Uploaded File field.
8
Click on the Upload button.
Wait until the file uploads completely before entering any other commands.
The Log Report window displays a confirmation message when the
upgrade is complete.
9
Restart the RLC.
RLC Installation and Administration Guide
Administration
293
Advertisement
Table of Contents
Troubleshooting
