Nortel RLC Installation And Administration Manual page 168

Using Configuration Manager
Operation
Retrieve
Save to Flash
142
Description
When you click on the Retrieve button on a property sheet,
the configuration stored in the buffer of the unit that you are
connected to (the latest configuration information) displays
in Configuration Manager.
If the retrieval is successful, the following message displays:
Data Received Successfully
When you choose Upload/Download
the Menu Bar, the information stored in the logged-on unit's
buffer is saved to Flash memory. This prevents the
configuration from being lost if the unit loses power.
While in progress, the following message displays in the
status bar at the bottom of the screen:
Save to Flash
When the Save to Flash is completed, the Data Stored to
Flash dialog box displays.
Some changes require a restart of the unit after saving the
changes. If a restart is necessary, Configuration Manager
prompts you to do so.
Notes:
You must click on the Send button or choose Upload/
→
Download Send All from the Menu Bar before you
choose Upload/Download
Save to Flash as often as you think it is necessary, to keep
your configuration information safe.
Do not ignore error messages in the Save to Flash
process. If Save to Flash fails, retry uploading and saving
to Flash. If the problem persists, check the file being
uploaded and report the problem to Nortel.
→
Save to Flash from
→
Save to Flash. Perform a
RLC Installation and Administration Guide
Standard 4.0