Table of Contents
Advertisement
June 2005
Self-contained firmware upgrade
A self-contained firmware upgrade executable file is also available.
To perform this form of upgrade, both the administration PC and the RLC must
be connected using a 10BaseT Ethernet connection. The self-contained firmware
upgrade executable file can run on a Windows 98, NT Workstation 4.0,
Millennium Edition (ME), 2000 Professional, or XP (Professional and Home
Edition) operating system.
To obtain the self-contained firmware upgrade executable file, click on the
Software Downloads link at the following website:
www.nortel.com
Note: You can also email this file to a remote user.
To perform the upgrade:
1
Double click on the .exe file.
Result: The WinZip Self-Extractor dialog box displays, similar to the
following:
2
Click on the Setup button to run the Remote Gateway 9100 Series
Firmware Upgrade Manager.
Note: You can cancel the upgrade at anytime by clicking on the Cancel
button on any of the upcoming dialog boxes. You can find out information
regarding this application by clicking on the About button.
Result: The WinZip Self-Extractor unzips the RLC upgrade file and
displays an unzip progress bar, similar to the following:
RLC Installation and Administration Guide
Administration
295
Advertisement
Table of Contents
Troubleshooting
