Configuring Syslog Functionality - Nortel RLC Installation And Administration Manual

Configuring the RLC

Configuring syslog functionality

To configure syslog functionality on your RLC, complete the following steps:
1 Access the Syslog Configuration property sheet.
2 Complete the fields as described in "Syslog Configuration field
descriptions" on page 235.
3 Click on the OK button.
Result: Configuration Manager writes the changes to a temporary file on
the administration PC.
4 Click on the Send button to update the RLC with the new information.
Note: To save changes to the RLC's Flash memory, select Upload
to Flash from the Menu Bar.
234 RLC Installation and Administration Guide
Standard 4.0
→
Save