Nortel RLC Installation And Administration Manual page 234

Configuring the RLC
Field
PSTN: Configure
PSTN Number
Dedicated PSTN n/w
(network) Port
Bandwidth: Extra
Bandwidth: Priority
Reserved
208
Description
Select whether you want to manually configure the PSTN
number used by the RLC for initiating a PSTN connection
to the remote site.
Click on the Yes option button to manually configure
the PSTN number.
Click on the No option button if you do not wish to
manually configure the PSTN number.
Note: If you select Yes, you must also configure a PSTN
number for the remote unit.
The default is Yes.
Enter the PSTN number the RLC must dial to connect to
the remote unit.
The default is NC (Not Configured).
For configuration details, refer to "PSTN configuration"
on page 201.
Enter the RLC network port number that is dedicated to
support the remote unit.
The default is 16.
Note: All network ports that are not dedicated are used as
a pool to support additional network connections to remote
units.
Enter the minimum number of Kbytes of bandwidth to
have available at any time for PSTN access to the remote
unit.
The default is 0.
Enter the Kbytes of PSTN bandwidth you would like to
reserve for high priority DNs.
The default is 0.
RLC Installation and Administration Guide
Standard 4.0