Nortel RLC Installation And Administration Manual page 124

Installing the RLC
Field
Enter the Local IP
Mask of the unit
Enter the Local IP
Gateway of the unit
The following is a completed example:
6 Click on the Next button.
Result: The Set the Remote Unit information dialog box displays. A
completed example is shown on page 101.
98
Description
Enter the subnet mask.
Note: The system requires that you enter an IP
address. If you are using PSTN only, enter the
following: 255.255.0.0.
Enter the IP address of the gateway between
the RLC and the network.
Note: The system requires that you enter an IP
address. If you are using the PSTN only, enter
1.2.3.5. as both the IP address on the
administration PC and gateway on the RLC.
RLC Installation and Administration Guide
Standard 4.0
The IP information
allows you to administer
the RLC from any
location on the network.