Chapter 2
Cabling the gateway and turning the power on
This chapter provides information about how to connect communications cables
and the power cord to the Contivity 600.
This chapter contains the following topics:
Topic
Connecting communications cables
Connecting the power cord
Understanding the LEDs
Caution: Connect the cables to the built-in Ethernet ports and to the
interfaces on the optional interface card installed in the Contivity 600
before you plug the power cord into the outlet.
Caution: Cabling for all WAN, LAN, and serial connections is not to be
routed outside the building environment.
Page
22
24
25
Installing the Contivity 600
21