Nortel RLC Installation And Administration Manual page 121

June 2005
IF the logon attempt
fails,
is successful,
RLC Installation and Administration Guide
THEN
the following message displays:
10060 SERIAL CONNECTION FAILED
Check the serial connection and ensure it is good.
Then, go back to step 1.
the User Logged In dialog box displays.
Click on the OK button.
Result: The Startup Information dialog box
displays, similar to following:
Messages similar to the following display above
the progress bar at the bottom of the dialog box:
Reading Hardware Information
Reading DSP Load Data
Reading Configuration Data
These messages indicate that Configuration
Manager is obtaining the unit's configuration
information from Flash memory.
Click on the Close button.
Installing the RLC
95