Table of Contents
Advertisement
June 2005
Alarms and alerts
For troubleshooting purposes, each Remote Gateway 9100 Series device
transmits alarms and alerts to the host PBX. These alarms and alerts indicate to
the host PBX that the Remote Gateway 9100 Series device is in a state of alarm
or alert. The host PBX then produces an alarm or alert through its software.
Refer to "Display Logs" in the Remote Gateway 9150 Installation and
Administration Guide (NTP 555-8421-215) or Configuration Manager online
Help to determine if the host PBX produces an alarm or alert when Remote
Gateway 9100 Series Configuration Manager produces a display log.
RLC Installation and Administration Guide
Troubleshooting
323
Advertisement
Table of Contents
Troubleshooting
