Nortel RLC Installation And Administration Manual page 79

June 2005
RLC Installation Checklist
Page 2 of 7
✔
Task
❒
If you want to use the IP network to
route calls, evaluate the IP network to
determine if the network
infrastructure can support voice
traffic.
❒
Plan the installation and cabling of
RLCs.
❒
Decide on the administration PC
setup.
❒
Obtain the cables that you need to
establish the needed connections to
the network.
❒
Gather the configuration information
(network addresses, connection
numbers, online/offline schedule, QoS
thresholds, and so on).
❒
Plan RLC port assignments.
RLC Installation and Administration Guide
Planning for RLC installation
For details, refer to
your data network
administrator
the Remote Gateway 9100
Series Network Engineering
Guidelines
(NTP 555-8421-103)
You can obtain this
document online at the
following address:
www.nortel.com
Chapter 2, "Planning for
installation".
"Administration PC".
"Reach Line Card cables".
"Deployment options"
Appendix A, "Planning
forms"
"Connection Information—16
ports" or "Connection
Information—32 ports",
depending on your RLC.
53