Nortel RLC Installation And Administration Manual page 126

Installing the RLC
Field
Wish to Enable PSTN
Voice Connection to
Remote
8 Click on the Press to update the remote unit list button.
Result: The information entered for this remote unit displays in the list of
configured remote units in the lower half of the Set the Remote Unit
information dialog box.
100
Description
Click on the Yes option button to enable
PSTN connection to the Remote Gateway
9100 Series unit.Then complete the
following steps:
a Enter the number of the RLC port that
you want to dedicate for connections to
this remote unit.
Note: The port must be a PBX data port.
b Enter the telephone number that must be
dialed to connect to the remote unit.
The telephone number can include the
following digits or characters: 0 through
9, #, *, comma (,), period (.), and dash
(-).
Trunk access digit delimiter: "#"
(pound/number sign)
Caller ID separator and 1/2 second
delay: "," (comma)
Caller ID separator: "." (period)
null separator: "-" (dash)
Refer to "Configuring 10-digit ISDN
numbers" on page 202 for more
information.
Click on the No option button to disable the
PSTN connection to the Remote Gateway
9100 Series unit. Clicking on the No option
button dims the PSTN Number fields.
RLC Installation and Administration Guide
Standard 4.0