Nortel RLC Installation And Administration Manual page 55

June 2005
Locally controlled calls
There are three types of locally controlled calls:
A Remote Gateway 9150 unit user begins a call by pressing one of the local
calling keys. The user then dials the DN of another local calling key. The
Remote Gateway 9150 unit processes this call.
A Remote Gateway 9150 unit user begins a call by pressing one of the local
calling keys. The user then dials a local trunk access code. The local PSTN
processes this call. Refer to the diagram on page 34.
A Remote Gateway 911x series user begins a call by pressing a key
configured as a local calling key. The user then dials a local telephone
number. The local PSTN processes this call. Refer to the diagram on page
40.
The host PBX is not involved in any of the call scenarios above. These scenarios
describe calls processed in the locally controlled mode.
RLC Installation and Administration Guide
RLC description
29