Nortel RLC Installation And Administration Manual page 444

Fields Index
Day
Auto Upgrade 230
RLC System Configuration 176
Dedicated Port 195
Remote Unit ID 195
Default (button) 135
default load (G.729A)
DSP configuration 226
Delete
Syslog Configuration 235
Dialtone/DTMF Relay 169
DiffServ CodePoint 183
Value 183
DSP configuration
default load (G.729A) 226
DSP Gain 175
DSP Load 226
Duration 254
Signal Degrade 214
Signal Recover 214
E
Enable DN Discovery 176
Enable PBX Alarms 174
Enter a node name to recognize the unit 97
Enter the local IP Address of the unit 97
Enter the Local IP Gateway of the unit 98
Enter the Local IP Mask of the unit 98
F
Facility Indicator 235
Files of type 146
Frequency 176, 230
Full Duplex Ethernet 185
418
G
G.711 190
required VoIP bandwidth 199
G.726 190
required VoIP bandwidth 199
G.729A 190, 192
DSP configuration
default load 226
required VoIP bandwidth 199
calculation examples 200
G.729A During QoS Transition 192
G.729A/FAX 190
required VoIP bandwidth 199
H
Hardware Statistics
Module No 267
Module Type 267
Status 267
Version 267
Hardware statistics
Available Channels 270
Available Flex Channels 271
Available MIPS 270
Available Voice Channels 271
Device Number 270
In Service 270
Module Number 270
Name 271
Single Dig Dev ID 270
Total Channels 270
Total Flex Channels 271
Total MIPS 270
Total Reserved Channels 271
Total Tones Channels 271
Total Voice Channels 270
Help (button) 135
RLC Installation and Administration Guide
Standard 4.0