Table of Contents
Advertisement
Using Configuration Manager
What is Configuration Manager?
Configuration Manager is a Windows-based software application that you install
on your PC. Configuration Manager allows you to configure, administer, and
upgrade the Remote Gateway 9150 unit. These tasks can be performed over
either of the following connection types:
10BaseT Ethernet
RS-232 serial
Note: It is not possible to use Configuration Manager to configure an RLC
or Remote Gateway 9100 Series unit over a modem connection.
The CD shipped in the Remote Gateway 9150 unit package includes the
Configuration Manager software. You can obtain the CD from your Nortel
distributor or click on the Support link at the following website:
www.nortel.com
For the required characteristics of the Remote Gateway 9100 Series
administration PC, refer to "Windows PC requirements" on page 69.
To install the Configuration Manager software on your administration PC, refer
to "Installing Configuration Manager software" on page 90.
ATTENTION!
i. Complete initial configuration of Remote Gateway 911x series and
Digital Telephone IP Adapter units with the telephone set menu. Complete
subsequent configuration updates of these units with Configuration Man-
ager. For further information, refer to the Remote Gateway 911x Installation
and Administration Guide (NTP 555-8421-220) or the Digital Telephone IP
Adapter Installation and Administration Guide (NTP 555-8421-211).
126
Complete all Remote Gateway 9100 Series configuration
using Configuration Manager
interface (MMI) with the assistance of technical support
personnel for troubleshooting and diagnostic testing. For
further details, refer to "Command line interface" on page
46.
i
. Only use the man-machine
RLC Installation and Administration Guide
Standard 4.0
Advertisement
Table of Contents
Troubleshooting
