Table of Contents
Advertisement
June 2005
Restoring the configuration
Restore the configuration to the RLC's Flash memory by uploading a
configuration text file from a PC on the same network as the RLC. To do this,
perform the upload over the IP network using the TFTP protocol.
Before you begin
Before you can upload the configuration file to the RLC, you must complete the
following steps:
1
Start the TFTP server application.
2
Ensure that the TFTP base directory points to the location of the
configuration file.
Getting there
RLC
RLC Installation and Administration Guide
→
Configuration Manager
Administration
243
Advertisement
Table of Contents
Troubleshooting
