Nortel RLC Installation And Administration Manual page 231

June 2005
Remote Connection Configuration field descriptions
Field
Unit ID
Unit Type
Node Name
Modem options
Status
RLC Installation and Administration Guide
Description
Select the site number assigned to the remote unit you are
configuring.
Valid options are 1 through 20.
Select 911X, or 9150 according to the Remote Gateway
9100 Series unit you are configuring at the remote site.
Note: A maximum of eight Remote Gateway 9150 units
can be connected to the same RLC.
The default is 9150.
This display only field provides the Node Name of the
Remote Gateway 9100 Series unit. When you enter the
Node Name on the 9150 or 911x System Configuration
property sheet, this field automatically populates to allow
you to identify remote units by name when viewing the
Remote Connection Configuration property sheet.
Click on the Modem Options button if you want to
configure the length of the answer tone on the answering
modem.
Note: The answer tone is needed to disable the echo
cancellers on long distance calls.
Select whether you want to process calls through this port.
Click on the Enable option button to activate the
remote unit.
Click on the Disable option button to deactivate the
remote unit.
The default is Disable.
Configuring the RLC
205