Nortel RLC Installation And Administration Manual page 82

Planning for RLC installation
RLC Installation Checklist
Page 5 of 7
✔
Task
❒
Configure a Remote port on the RLC
for each user.
Note: The process of creating the
PSTN communication path with the
Configuration Wizard creates a
Network port for each remote unit.
❒
Configure an Online/Offline
Schedule for each remote unit, if
required.
5. Remote unit configuration
❒
Ensure that the remote unit is
configured with the information it
needs to establish connections with
the RLC.
❒
Ensure that a station is configured for
each remote user.
56
For details, refer to
Chapter 6, "Configuring the
Reach Line Card".
"Configuring an online/offline
table".
Note: A blank online/offline
schedule can be found in the
Online/Offline Table section of
Configuration Manger.
the Installation and
Administration Guide for the
remote unit.
the Remote Gateway 9150
Installation and Administration
Guide (NTP 555-8421-215), or
the Remote Gateway 9100
Series 911x Series Installation
and Administration Guide
(NTP 555-8421-220), depending
on remote site equipment.
RLC Installation and Administration Guide
Standard 4.0