June 2005
Symptom
The RLC cannot establish a
connection with the remote unit.
(continued)
RLC Installation and Administration Guide
What to do
3
Verify that the network port PSTN
telephone number is configured
correctly on both the Network Port
Configuration window of the RLC Port
Configuration property sheet. Refer to
"Configuring an RLC port" on page 188
and "Configuring the RLC Connection
information" in the Remote Gateway
9150 Installation and Administration
Guide (NTP 555-8421-215).
Note: This is the same telephone
number configured on both property
sheets.
Troubleshooting
309