Table of Contents
Advertisement
Troubleshooting
Software problems
This section identifies some problems that can occur with the Configuration
Manager software, and describes what to do to resolve them.
Symptom descriptions
If you are not able to complete a task with Configuration Manager, perform
troubleshooting as described in the following table:
Symptom
The Configuration Manager
software installation fails.
When performing one of the
following by TFTP,
FILE OPEN FAILED
configuration upload
RLC firmware upgrade
CONFIG UPLOAD FAILED
attempting to perform a
configuration upload by TFTP.
310
What to do
Ensure that you close all background
applications, including anti-virus checking
software before performing the installation.
1
Ensure the TFTP server application is
installed and running on your
ERROR:
administration PC.
displays:
2
Ensure the file you are trying to upload is
present in the target directory. That is,
either in the TFTP directory, or in the
directory that is specified as the base
directory in the TFTP server application.
3
Review messages displayed by the TFTP
server application for clues.
4
PING the remote unit to verify that
network connectivity exists.
when
1
Ensure that you selected an appropriate
file. That is, ensure that the file you
attempted to upload is an RLC
configuration file.
RLC Installation and Administration Guide
Standard 4.0
Advertisement
Table of Contents
Troubleshooting
