Nortel RLC Installation And Administration Manual page 300

Administration
Ethernet Interface Statistics field descriptions
The following table describes the statistics on the Ethernet Interface Statistics
screen:
Statistic
Channel
LAN Drv
Admin
Oper
IfcType
IfcNo
MTUlen
Speed
Rx Octet
Rx Ucast
Rx Mcast
274
Description
Identifies the Ethernet device that the statistics on that
line apply to.
Valid values are 1 and 2.
Identifies the LAN driver used by the call.
Identifies the desired state of the port.
Identifies the actual state of the port.
Identifies the interface type used by the call.
Identifies the Ethernet interface used by the call.
Valid values are 0 (ELAN) and 1 (CLAN).
Identifies the Maximum Transmission Unit for this
interface in bytes.
Identifies the data rate of this interface in Mbps.
Identifies the number of bytes received on the given
channel since the statistics were last reset.
Identifies the number of packets with a unicast Ethernet
address that directly matches the Ethernet address of the
identified unit. This statistic describes the period of time
since the statistics were last reset.
Identifies the number of multicast packets received.
These packets can be broadcast MAC addresses for
protocols such as ARP, as well as multicast packets for
group-oriented transmissions such as IP Multicast. This
statistic describes the period of time since the statistics
were last reset.
RLC Installation and Administration Guide
Standard 4.0