Nortel RLC Installation And Administration Manual page 228

Configuring the RLC
— 912125552000 (if long distance and the 9150 BRI CO uses a "9" access
code)
Configuring 10-digit ISDN numbers
If the service documents supplied by the BRI service provider contains a 10-
digit ISDN number, then the configuration is as follows:
Remote Gateway 9150 BRI configuration
Configure the PSTN numbers with the 10 digits provided. For example:
2145551000 configured on the corresponding B-channel.
RLC Remote Connection Configuration
Use the # delimiter to separate the Trunk Access code from the PSTN
number. For example:
— #9#2145551000 (not 92145551000) where "5551000" is the primary
Remote Gateway 9150 unit B-channel and "9" is the Trunk Access
Code.
— #91#2145551000 (if long distance)
RLC Network Port configuration
Enter the Network Port PSTN Number exactly as the Remote Gateway
9100 Series unit must dial it. For example:
— 5552000 (for seven digit local call) where 5552000 is a PBX DID data
port number
— 12125552000 (if long distance)
— 912125552000 (if long distance and the Remote Gateway 9150 BRI CO
uses a 9 access code)
Configuring 911x PSTN connections
To configure a PSTN Remote Gateway 911x series unit:
1 Access the RLC Connection Configuration sheet in Configuration Manager.
2 Enter the DID number of the dedicated PSTN network port on the RLC for
the Remote Gateway 911x series unit in the PSTN Number to Connect to
RLC field.
3 Click on the OK button.
202 RLC Installation and Administration Guide
Standard 4.0