Job Aid: S8300 Communication Manager and
co-resident SES: Replacing the S8300C or S8300D
Server or hard drive
This Job Aid describes the procedures to replace an S8300C or S8300D Server installed with
Communication Manager release 5.2 and co-resident SIP Enablement Services (SES)
application or its hard drive. If the customer has the Communication Manager Messaging
application installed, messaging related tasks are also included in the replacement procedure.
This section contains procedures to:
Replace an S8300C server with an S8300C (SES enabled)
●
Replace an S8300D server with an S8300D (SES enabled)
●
Replace an S8300C or S8300D hard drive (SES enabled)
●
To replace an S8300C or S8300D Server or hard drive with SES not enabled, see
Replacing the S8300 Server or its hard drive
!
Important:
Always check the Avaya Support Website for Product Correction Notices at
Important:
http://support.avaya.com
products) in the MOST POPULAR PRODUCTS IN SUPPORT section.
!
Important:
Check if the customer requires the backup data to be stored at specific location
Important:
since backing up data is critical to ensure data restore.
Note:
The Avaya S8300D Server will be available after May 2009.
Note:
Replacement materials
Hardware
S8300C Server
S8300C Server (Material ID 700407810)
●
40 GB hard disk drive (Material ID 700406606)
●
on page 1.
and select Product Correction Notices (All Avaya
Job Aid:
03-300528 Issue 6 May 2009
19