Table of Contents
Advertisement
Chapter 5: System configuration
Traditional Digital Enhanced Cordless Telecommunications (DECT) is an application on the system that
allows digital wireless capabilities. With DECT, users can move around their work sites while answering
a call, making a call, continuing a call, or transferring a call.
Session Initiation Protocol (SIP) DECT on SIP Line provides the features of traditional DECT so that the
SIP DECT system can interact with Avaya Communication Server 1000 (Avaya CS 1000) through the SIP
Line gateway.
Prior to Communication Server 1000 Release 7.0, it was possible to connect SIP clients using the SIPN
connection method. Beginning in CS 1000 Release 7.0 the SIPN connection method is no longer
supported; however, you can migrate your SIPN connection to a SIPL connection. For more information
on the Upgrade procedure, see
Navigation
This section contains the following navigation links to SIP DECT configuration procedures:
•
Basic (simple) SIP DECT configuration with Communication Server 1000 SIP Line
Gateway
•
Routed Head Quarter configuration
•
Multiple-site mobility network configuration
Basic (simple) SIP DECT configuration with Communication
Server 1000 SIP Line Gateway
To configure the SIP DECT system, you must configure the following three components: the
Call Server, the SIP LINE Gateway, and the DAP manager. Use the DAP manager to configure
and monitor DAPs.
Use the following tools to configure a SIP DECT system:
• Element Manager or overlay program for Call Server
• IP DECT Configurator and DAP manager IP DECT, which are available as a part of the
DAP controller software package
SIP DECT Fundamentals
Upgrade a SIPN connection to a SIPL connection
on page 93
on page 109
on page 113
on page 235
October 2012
93
Advertisement
Table of Contents
