Inserting The Communication Manager Cd-Rom Into The Standby Server - Avaya S8 Series Manual

Upgrading Communication Manager on the S8700-Series main or ESS servers from R2.x/R3.x/R4.x/R5.x to
9. If your Web browsers are open, refresh the screen.
Inserting the Communication Manager CD-ROM into the standby
server
To insert the CD-ROM into the standby server:
1. Insert the CD-ROM that contains Communication Manager into the CD-ROM drive on the
standby server.
2. Close the tray.
Note:
You can copy Communication Manager software from an http or tftp server onto
Note:
the server. In this case, skip this step.
!
CAUTION:
When you are upgrading the server as a primary controller, you must check
CAUTION:
Latest Communication Manager Software & Firmware Compatibility Matrix
for the supported upgrade paths. If you attempt to upgrade the server to a
release that is not supported as an upgrade path, you might corrupt the
translations.
Also, you must check Latest Communication Manager Software & Firmware
Compatibility Matrix for compatibility of software loads between the primary
controller and any LSPs or ESS servers. If the software loads of the primary
controller and the LSPs/ESS servers are incompatible, then file synchronization
between the primary controller and the LSPs/ESS servers can cause translation
corruption on the LSPs/ESS servers.
To check the Latest Communication Manager Software & Firmware
Compatibility Matrix from any computer, access http://support.avaya.com.
Select Downloads > Latest TN Circuit Pack, Media Server, and Media
Gateway Firmware and Software Updates > Latest Communication Manager
Software & Firmware Compatibility Matrix.
166 Upgrading Avaya Aura™ Communication Manager on Avaya S8xxx Servers