Subaru Legacy 2005 Service Manual page 3769

6. Front Wiper Arm
A: REMOVAL
CAUTION:
When standing up the wiper arm, be sure to
stand up the driver's side wiper arm first, and
then passenger's side wiper arm next. Also,
when putting the wiper arms back, be sure to
start with passenger's side first, then driver's
side next. Doing this in the reverse order may
result in damage of passenger's side wiper arm
by hitting with driver's side wiper blade.
1) Open the front hood.
2) Remove the cap.
3) Remove the nut to remove wiper arm.
B: INSTALLATION
1) Install in the reverse order of removal.
2) Operate the wiper once.
3) Align the wiper blade to ceramic print point mark
(A) of front window panel.
(A)
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion".
<Ref. to WW-2, FRONT WIPER, COMPO-
NENT, General Description.>
Front Wiper Arm
C: ADJUSTMENT
Operate the wiper once. Align the wiper blade to
ceramic print point mark (A) of front window panel.
WW-00232
WW-00048
WW-17
WIPER AND WASHER SYSTEMS
(A)
WW-00048