Subaru Legacy 2005 Service Manual page 3912

Front Inner Remote
SECURITY AND LOCKS
4. Front Inner Remote
A: REMOVAL
1) Remove the door trim. <Ref. to EI-48, REMOV-
AL, Door Trim.>
2) Remove the back cover (1) of inner remote.
3) Remove the cable (2).
4) Remove the wire end ball (3).
5) Remove the screws (4), and detach the inner re-
mote handle.
(4)
(2)
(3)
(4)
(1)
SL-00279
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure the inner remote works correctly after in-
stallation.
C: INSPECTION
1) Check the door opener and door lock cable for
deformation. When it is deformed, straighten it be-
cause failure operations may occur. When it is un-
repairable, replace the front door latch & door lock
actuator assembly.
2) Check the lever, rod and wire for smooth opera-
tion.
SL-26