Subaru Legacy 2005 Service Manual page 4051

C: ADJUSTMENT
1) Using the ST, loosen the body-side bolts of up-
per and lower hinges to align the position of front
door panel longitudinally and laterally.
ST 925610000 DOOR HINGE WRENCH
2) Loosen the screws (A), and tap the striker (B)
using plastic hammer to adjust the gap between
rear end surface of front door panel and front end
surface of rear door.
CAUTION:
Do not use an impact wrench. Welding area on
the striker nut plate is easily broken.
(A)
Front Door
ST
EB-00016
(B)
EB-00017
EB-19
EXTERIOR BODY PANELS