Table of Contents
Advertisement
I: DTC 25 IG2 OPEN
DTC DETECTING CONDITION:
• Airbag control module is faulty.
• Airbag main harness circuit is open.
• Fuse No. 12 (in joint box) is blown.
• Body harness circuit is open.
CAUTION:
• Before diagnosing the airbag system, be sure to turn the ignition switch OFF, disconnect the
ground cable from battery, and wait more than 20 seconds before starting to work.
• When replacing the airbag module, seat belt pretensioner, roll connector, control module and sen-
sor, reconnect each part and check that the warning light operates properly.
• When inspecting the airbag main harness, disconnect the airbag module connector of the driver's
and passenger's seats for safety reasons.
WIRING DIAGRAM:
Diagnostic Chart with Trouble Code
AB6
AIRBAG CONTROL MODULE
1 2 3
7 8 9 10 11 12 13 14 15 16 17
18 19 20 21 22 23 24 25 26 27 28
No.12
AB6
4 5 6
AB(diag)-55
AIRBAG SYSTEM (DIAGNOSTICS)
IGNITION
SWITCH
AB-00665
Advertisement
Chapters
Table of Contents
