Subaru Legacy 2005 Service Manual page 4055

C: ADJUSTMENT
1) Open the rear door, loosen the door-side bolts of
upper and lower hinges to align the position of rear
door panel longitudinally and laterally.
2) Loosen the screws (A), and tap the striker (B)
using plastic hammer to adjust the gap between
rear end surface of rear door panel and body sur-
face.
CAUTION:
Do not use an impact wrench. Welding area on
the striker nut plate is easily broken.
(A)
Rear Door
EB-00015
(B)
EB-00017
EB-23
EXTERIOR BODY PANELS