Subaru Legacy 2005 Service Manual page 4222

Hide thumbs Also See for Legacy 2005:

Table of Contents

WIRING SYSTEM

• In the wiring diagram, connectors which have no

terminal number refer to one-pole types. Sketches

of these connectors are omitted intentionally.

• The following color codes are used to indicate

the colors of the wires.

Basic Diagnostic Procedure

Sealed (Inner)

Sealed (Outer)

• The wire color code, which consists of two letters

(or three letters including Br or Lg), indicates the

standard color (base color of the wire covering) by

its first letter and the stripe marking by its second

Marking color :

Reference color :

• The table lists the nominal sectional areas and

allowable currents of the wires.

When replacing or repairing a wire, be sure to

use the same size and type of the wire which

was originally used.

• The allowable current in the table indicates the

tolerable amperage of each wire at an ambient

temperature of 40°C (104°F).

• The allowable current changes with ambient

temperature. Also, it changes if a bundle of more

than two wires is used.

Nominal sec-

strand diam-

40°C (104°F)

2.2 (or 2.0)

2.6 (or 2.4)

2.4 (or 2.2)

2.7 (or 2.5)

3.1 (or 2.9)

3.8 (or 3.6)

4.6 (or 4.4)

Chapters

Table of Contents