Wiper Blade - Subaru Legacy 2005 Service Manual

4. Wiper Blade

A: REMOVAL
CAUTION:
When replacing the wiper blade, if standing up
the wiper arm, be sure to stand up the driver's
side wiper arm first, and then passenger's side
wiper arm next. Also, when putting the wiper
arms back, be sure to start with passenger's
side first, then driver's side next. Doing this in
the reverse order may result in damage of pas-
senger's side wiper arm by hitting with driver's
side wiper blade.
1. FRONT
While pushing the locking clip (A) up, pull out the
blade from arm to arrow direction.
2
3
2. REAR
Turn the blade in the direction of the arrow (A) and
remove it from arm.
(3)
(A) Turn the wiper blade.
(1) Wiper arm
(2) Wiper Blade
(3) Installing part of wiper blade
B: INSTALLATION
1) Install in the reverse order of removal.
2) Confirm that the clip is locked securely.
Wiper Blade
3
(A)
2
1
WW-00064
(1)
(2)
(A)
WW-00207
WW-13
WIPER AND WASHER SYSTEMS
C: DISASSEMBLY
1. METAL TYPE
Pull side (A) of the wiper rubber stopper and re-
move the rubber from blade assembly.
2. RESIN TYPE
Pull the wiper rubber top slightly from stopper (A)
and pull out fully.
(A)
D: ASSEMBLY
1. METAL TYPE
1) Insert the wiper rubber onto blade so that the
stopper is in the position shown in the figure.
WW-00009
WW-00143
WW-00230