Table of Contents
Advertisement
EXTERIOR/INTERIOR TRIM
4. Front Under Cover
A: REMOVAL
1) Lift-up the vehicle.
2) Remove the clips (A), (C) and bolts (B) in front
fender, and then remove the front under cover.
• Large type (Turbo model)
(A)
(B)
• Large type (DOHC non-turbo model)
(A)
(B)
• Small type (SOHC non-turbo model)
(A)
(A)
(B)
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
⋅
14 N
m (1.42 kgf-m, 10.3 ft-lb)
Front Under Cover
(C)
(A)
EI-00735
(A)
EI-00635
(A)
(A)
EI-00636
EI-26
Advertisement
Chapters
Table of Contents
