Subaru Legacy 2005 Service Manual page 4021

30.Rear Gate Trim
A: REMOVAL
1) Remove the clips (A), and remove the rear gate
pillar trim.
:(A)
2) Remove the clips, and detach the rear gate up-
per trim.
3) Remove the cover in the inner handle, and loos-
en the inside screw.
4) Turn over the weather strip, and remove the
clips.
Rear Gate Trim
5) Remove the clips (A), and remove the rear gate
lower trim.
(A)
6) Remove the rear gate weather strip.
EI-00670
NOTE:
If the weather strip clip is removed with excessive
force, the weather strip may be damaged. Be sure
EI-00671
to use a clip remover to remove.
B: INSTALLATION
Install in the reverse order of removal.
EI-00674
EI-69
EXTERIOR/INTERIOR TRIM
(A)
EI-01066
EI-00673
EB-00141